Images are for illustrative purposes only, actual product may differ

Tripp Lite SmartOnline 200-240V 10kVA 9kW Double-Conversion UPS, 6U, Extended Run, Network Card Slot, USB, DB9, Bypass Switch,C19

£2,977.98 £2,481.65
In stock
Only 4 left
Part Code:
Manufacturer:Tripp Lite

Tripp Lite SU10000RT3UG 10,000VA / 10kVA / 9000 watt online, double-conversion UPS system offers complete power protection for critical network applications. This system delivers online, double-conversion UPS protection with zero transfer time, suitable for advanced networking applications. Fault-tolerant auto-bypass prevents unexpected service interruptions during UPS overload or internal fault conditions. Included detachable PDU with manual bypass switch enables hot-swappable replacement of entire UPS power module with no interruption to connected equipment. Enhanced availability, fault tolerance and simple hot-swap replacement options make this UPS ideal for advanced networking applications in data centers, computer rooms, network closets and rugged industrial locations. ● Tripp Lite SU10000RT3UG 10kVA / 10,000VA / 9000 watt on-line, double-conversion UPS system in 6U total rack/tower configuration (3U UPS power module and 3U external battery pack) ● Detachable PDU with manual bypass switch enables hot-swappable UPS power module replacement with no interruption in output power to connected networking equipment ● Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions ● Hardwire input; 6 C19 outlets ● Maximum installed rack depth of only 32.5 in. / 82.6cm ● Full-time active power conditioning provides clean, continuous dual-conversion AC output free of voltage fluctuations, power interruptions and line noise ● Double-conversion operation converts raw input from AC to DC, then resynthesizes output power back to perfect sine wave AC with enhanced protection from harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types ● Maintains full-time sine wave output within 2% of selectable 200/208/220/230/240V nominal during brownouts as low 100V and overvoltages as high as 300V ● Supports 50/60Hz operation for worldwide frequency compatibility ● Expandable runtime is supported with optional BP240V10RT3U; BP240V787C-1PH external battery packs ● Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual) ● Intelligent battery management system with temperature-compensated charging extends battery life ● Highly efficient operation in optional economy mode significantly reduces BTU heat output and operating energy costs ● Battery independent restart ensures automatic UPS power-up without user interaction after lengthy power outages, even when batteries are expired and require replacement ● USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from ● HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X ● Compatible Tripp Lite UPS management card options TLNETCARD, WEBCARDLX, SNMPWEBCARD, MODBUSCARD and RELAYIOCARD support a wide variety of UPS control and monitoring capabilities ● Optional RELAYIOMINI interface module offers three configurable hard contact closure outputs for custom event notification (requires removal of USB interface module) ● Supports Emergency Power Off (EPO) via built-in interface ● Included rail kit supports 6U 19 inch rackmount installation in 4 post racks ● Optional 2POSTRMKITHD supports installation in 2 post 19 inch racks ● Front panel LEDs and LCD readout with scroll controls and password option supports visual monitoring of all major UPS functions and advanced UPS settings for charge level, nominal voltage selection, frequency conversion and other operational parameters ● LED / LCD display panel rotates for viewing in rackmount or tower configurations ● Network-grade AC surge and noise suppression ● Industrial mode option (factory preset) enables supports high current startup loads by momentarily switching to bypass mode in response to short duration overload conditions ● Frequency conversion mode enables conversion of 60Hz to 50Hz or 50Hz to 60Hz (no de-rating) ● External battery packs are field replaceable and hot swappable ● Included maintenance bypass switch enables live replacement of UPS with zero downtime ● 10kVA / 10,000VA / 9000W on-line double-conversion UPS; 0.9 power factor ● 200/208/220/230/240V 50/60Hz output with economy mode option ● 6U Rack/Tower compatible; Hot-swappable power and battery modules ● USB, RS232 & EPO ports; Slot for Network Management Card options ● Front panel LEDs with detailed LCD monitoring and control screen ● Expandable runtime with optional external battery packs ● Hardwire input (3 wire); C19 outlets Package Includes ● SU10000RT3UPM 3U UPS power module ● BP240V10RT3U external battery pack ● SUPDMB710IEC Detachable PDU with manual bypass switch ● Four post compatible rack rail kit (2 sets) ● USB, DB9 and EPO Cabling ● Instruction manual
More Information
Part Code: SU10000RT3UG
EAN 0037332127006
Output power9000 W
Input operation voltage (min)200 V
Input operation voltage (max)240 V
Output operation voltage (min)200 V
Output operation voltage (max)240 V
Power factor0.9
Crest factor3:1
Output power capacity10000 VA
UPS topologyDouble-conversion (Online)
Number of input phases1
Surge protectionYes
Noise level60 dB
UPS topologyDouble-conversion (Online)
Number of input phases1
Output power9000 W
Input operation voltage (min)200 V
Input operation voltage (max)240 V
Output operation voltage (min)200 V
Output operation voltage (max)240 V
Surge protectionYes
Power factor0.9
Noise level60 dB
Crest factor3:1
Output power capacity10000 VA
Input frequency50/60 Hz
Ports & interfaces
AC outlets quantity6 AC outlet(s)
AC outlet typesC19 coupler
USB 2.0 ports quantity1
Serial ports quantity1
Battery recharge time8 h
Typical backup time at half load12.5 min
Typical backup time at full load4.3 min
Hot-swap batteryYes
Cold startYes
Rack capacity6U
Form factorRackmount/Tower
Product colourBlack
Cooling typeActive
Operational conditions
Operating temperature (T-T)0 - 40 °C
Storage temperature (T-T)-15 - 50 °C
Operating altitude0 - 3000 m
Technical details
Sustainability certificatesRoHS
Cooling typeActive
Packaging data
Package width660.4 mm
Package depth1041.4 mm
Package height812.8 mm
Package weight140.6 kg
Weight & dimensions
Package width660.4 mm
Package depth1041.4 mm
Package height812.8 mm
Package weight140.6 kg
Manufacturer Tripp Lite

Install hardware to customer specification


We can build your servers, storage and related products to suit your exact requirements, fully customisable. We can advise you on the components that will deliver maximum performance.

  • Qualified Engineers
  • Cost effective
  • Professional Service
  • Quality
  • Bespoke Service
  • ESD-free Configuration Centre
  • Remove overheads


Install Operating System and perform Windows updates

install server

We specialise in installing and updating Microsoft Server Environments. Our qualified engineers will install OS and perform critical Windows updates saving you time to concentrate on the core business.

  • Microsoft Certified Professional Staff
  • Time Saving
  • Server is patched against threats
  • Ready straight from the box
  • Deliver Project on time


Configure hard drives in specified RAID

server raid

Setting up RAID can be quite complicated, we can set up various RAID options for you e.g. RAID1, RAID5, RAID10 etc.
  • Ready for OS installation
  • Performance
  • Complexity simplified


Install any customer specific BIOS/Firmware settings

server bios
Powering on and testing your product prior to despatch will prevent you from receiving Dead on Arrival (DOA) product. This is particularly important if the product is needed for an urgent installation.
  • Patched and up to date
  • Avoid problematic firmwares


Install server role services specified by the customer

Install Server Role
We can install key roles on your server ready for deployment. We will work with you and customise it to your business needs.

We are pleased to offer the following:

Domain controller: Domain controller is the centrepiece of your network as it manages all access.

Active Directory: Active Directory is a directory service. It stores user account information and enforces security policy.

DHCP: DHCP assigns IP addresses to devices on a network.

DNS: DNS translates names into IP addresses e.g. servername to

Distributed File System: DFS offers the ability to share files across the network with greater access policy.

Static IP Address: We can assign static IP addresses that you specify along with subnet mask, gateway address and DNS info so it’s ready from the moment it leaves our Config Centre. Once the server is on your network, you can immediately start configuring remotely from your office.

  • Essential roles
  • Deployment ready
  • Network Friendly
  • Work remotely – never leave your office
  • Tailored service
  • Qualified Microsoft Server engineers
  • We’ll do most of the work for you so you don’t have to.


Full Soak Test (12/24 hour)

Soak Test
We can run your system though comprehensive test cycles identifying faults, system stability and performance.
  • Identify issues
  • Measure system’s stability
  • Time Saving


Create customers asset tag/register

We offer asset tagging to ensure equipment is pre-tagged on delivery. Tamper resistant labels are available and personalised to your company. We will keep a record of asset numbers and serial numbers for management of warranty support or DOA calls.
  • Professional Service
  • Deployment ready
  • Personalised
  • Easily changeable


PDI - Pre Delivery Inspection

Powering on and testing your product prior to despatch will prevent you from receiving Dead on Arrival (DOA) product. This is particularly important if the product is needed for an urgent installation.
  • Reliability of Equipment
  • Avoid disappointment
  • Deliver project on time
Delivery Information

Standard Delivery (2 Working Days)
£7 per order

Free Delivery (7 days)

Delivery information:
Working days are Monday to Friday (excluding bank holidays).
Order cut-off time is 4pm, orders received after 4pm will be processed on the next working day.

Please Note:
Weight/Size/Post Code exceptions apply, please read our Terms & Conditions for full details. Prices subject to VAT.
Delivery prices based on deliveries upto 20kg in weight, weights exceeding 20kg may incur delivery surcharges.
APC UPS products are excluded from free delivery due to their heavy weight.
Quoted delivery timescales are based on information provided by shipping partners, on occasion these can vary and we can not be held responsible for this.
All delivery services require a signature on delivery, please ensure someone will be available to sign.