Images are for illustrative purposes only, actual product may differ

Intellinet 8-Port Fast Ethernet PoE+ Switch, 4 x PoE IEEE 802.3at/af Power-over-Ethernet (PoE+/PoE) ports, 4 x Standard RJ45 Ports, Endspan, Desktop, 19" Rackmount (UK 3-pin plug)

£66.78 £55.65
In stock
Only 4 left
Part Code:
561075-UK
Manufacturer:Intellinet


Save installation time and money with PoE. _x000D_
_x000D_
The Intellinet Network Solutions 8-Port Fast Ethernet PoE+ Switch (561075) is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with eight Fast Ethernet ports (four of which support 802.3at/af PoE/PoE+), this switch can power wireless LAN access points and bridges, VoIP phones, IP video cameras and more while delivering network speeds of up to 100 Mbps. _x000D_
_x000D_
Power over Ethernet 802.3at _x000D_
The Intellinet Network Solutions 8-Port Fast Ethernet PoE+ Switch supports the IEEE 802.3at protocol and is designed to inject up to 30 watts of power per port*. IEEE802.3af- or IEEE802.3at-compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimising the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short-circuit, overload and high-voltage protection function, your equipment is well protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest use of an Intellinet Network Solutions PoE/PoE+ Splitter. _x000D_
_x000D_
_x000D_
* Total PoE budget for this switch is 70 watts. Per-port average power distribution is 17.5 watts; maximum per-port power usage cannot exceed 30 watts.
More Information
Part Code: 561075-UK
EAN 0766623561075
Specification
Ports & interfaces
Copper ethernet cabling technology10BASE-T,100BASE-TX
Basic switching RJ-45 Ethernet ports quantity8
Basic switching RJ-45 Ethernet ports typeFast Ethernet (10/100)
Power connectorAC-in jack
Power
Power connectorAC-in jack
Power consumption (max)80 W
AC input voltage100 - 240 V
AC input frequency50/60 Hz
Technical details
Product colourBlack
Housing materialMetal
Rack mountingYes
Network
Copper ethernet cabling technology10BASE-T,100BASE-TX
Networking standardsIEEE 802.3,IEEE 802.3af,IEEE 802.3at,IEEE 802.3az,IEEE 802.3u,IEEE 802.3x
Full duplexYes
Flow control supportYes
Auto MDI/MDI-XYes
Data transmission
Packet forwarding rate (100 Mbps)148800 pps
Packet forwarding rate (10 Mbps)14880 pps
MAC address table2000 entries
Switching capacity1.6 Gbit/s
Store-and-forwardYes
Certificates
CertificationFCC Class A, CE
Design
Product colourBlack
LED indicatorsActivity, Link, PoE, Power
Housing materialMetal
CertificationFCC Class A, CE
Rack mountingYes
Indication
LED indicatorsActivity, Link, PoE, Power
Power over Ethernet (PoE)
Power over Ethernet (PoE) power per port30 W
Total Power over Ethernet (PoE) budget70 W
Power over Ethernet (PoE)Yes
Power over Ethernet (PoE) type supportedPoE+
Operational conditions
Storage temperature (T-T)-10 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90%
Weight & dimensions
Width280 mm
Depth179 mm
Height44 mm
Weight1.5 kg
Packaging data
Rack mount kitYes
ManualYes
Cables includedAC
Packaging content
Rack mount kitYes
ManualYes
Cables includedAC
Manufacturer Intellinet

Install hardware to customer specification

Installhardware
 


We can build your servers, storage and related products to suit your exact requirements, fully customisable. We can advise you on the components that will deliver maximum performance.

  • Qualified Engineers
  • Cost effective
  • Professional Service
  • Quality
  • Bespoke Service
  • ESD-free Configuration Centre
  • Remove overheads

 

Install Operating System and perform Windows updates

install server
 

We specialise in installing and updating Microsoft Server Environments. Our qualified engineers will install OS and perform critical Windows updates saving you time to concentrate on the core business.

  • Microsoft Certified Professional Staff
  • Time Saving
  • Server is patched against threats
  • Ready straight from the box
  • Deliver Project on time

 

Configure hard drives in specified RAID

server raid

Setting up RAID can be quite complicated, we can set up various RAID options for you e.g. RAID1, RAID5, RAID10 etc.
  • Ready for OS installation
  • Performance
  • Complexity simplified

 

Install any customer specific BIOS/Firmware settings

server bios
Powering on and testing your product prior to despatch will prevent you from receiving Dead on Arrival (DOA) product. This is particularly important if the product is needed for an urgent installation.
  • Patched and up to date
  • Avoid problematic firmwares

 

Install server role services specified by the customer

Install Server Role
We can install key roles on your server ready for deployment. We will work with you and customise it to your business needs.

We are pleased to offer the following:

Domain controller: Domain controller is the centrepiece of your network as it manages all access.

Active Directory: Active Directory is a directory service. It stores user account information and enforces security policy.

DHCP: DHCP assigns IP addresses to devices on a network.

DNS: DNS translates names into IP addresses e.g. servername to 192.168.1.1

Distributed File System: DFS offers the ability to share files across the network with greater access policy.

Static IP Address: We can assign static IP addresses that you specify along with subnet mask, gateway address and DNS info so it’s ready from the moment it leaves our Config Centre. Once the server is on your network, you can immediately start configuring remotely from your office.

  • Essential roles
  • Deployment ready
  • Network Friendly
  • Work remotely – never leave your office
  • Tailored service
  • Qualified Microsoft Server engineers
  • We’ll do most of the work for you so you don’t have to.

 

Full Soak Test (12/24 hour)

Soak Test
We can run your system though comprehensive test cycles identifying faults, system stability and performance.
  • Identify issues
  • Measure system’s stability
  • Time Saving

 

Create customers asset tag/register

Tag
We offer asset tagging to ensure equipment is pre-tagged on delivery. Tamper resistant labels are available and personalised to your company. We will keep a record of asset numbers and serial numbers for management of warranty support or DOA calls.
  • Professional Service
  • Deployment ready
  • Personalised
  • Easily changeable

 

PDI - Pre Delivery Inspection

PDI
Powering on and testing your product prior to despatch will prevent you from receiving Dead on Arrival (DOA) product. This is particularly important if the product is needed for an urgent installation.
  • Reliability of Equipment
  • Avoid disappointment
  • Deliver project on time
Delivery Information




Standard Delivery (2 Working Days)
£7 per order

Free Delivery (7 days)
Free

Delivery information:
Working days are Monday to Friday (excluding bank holidays).
Order cut-off time is 4pm, orders received after 4pm will be processed on the next working day.

Please Note:
Weight/Size/Post Code exceptions apply, please read our Terms & Conditions for full details. Prices subject to VAT.
Delivery prices based on deliveries upto 20kg in weight, weights exceeding 20kg may incur delivery surcharges.
APC UPS products are excluded from free delivery due to their heavy weight.
Quoted delivery timescales are based on information provided by shipping partners, on occasion these can vary and we can not be held responsible for this.
All delivery services require a signature on delivery, please ensure someone will be available to sign.