Images are for illustrative purposes only, actual product may differ

Intellinet 16-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports, IEEE 802.3at/af Power over Ethernet (PoE+/PoE) Compliant, 374 W, Endspan, 19" Rackmount (UK 3-pin plug)

£288.76 £240.63
In stock
Only 2 left
Part Code:
561198-UK
Manufacturer:Intellinet


You asked for more power. We listened.

The Intellinet Network Solutions 16-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports (561198) is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with sixteen Gigabit Ethernet ports, all of which support 802.3at/af Power over Ethernet (PoE/PoE+), this switch can power Wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) telephones, IP surveillance cameras and more while delivering network speeds of up to 1,000 Mbps.

Power over Ethernet 802.3at
The Intellinet Network Solutions 16-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports supports the IEEE 802.3at protocol and is designed to inject up to 30 watts of power per port*. IEEE802.3af or IEEE802.3at compliant devices attached to the switch require no additional power, thus eliminating the time and expense of electrical rewiring and minimising the unsightly clutter caused by power supplies and adapters in awkward places such as ceilings and walls. Any mix of PoE and non-PoE devices is supported, and thanks to its short circuit, overload and high-voltage protection function, your equipment is well-protected. For devices that are not 802.3at/af compliant (legacy wireless access points or network cameras), we suggest use of an Intellinet Network Solutions PoE/PoE+ Splitter.

Sophisticated PoE Management Features
The Intellinet Network Solutions 16-Port Gigabit Ethernet PoE+ Web-Managed Switch provides detailed, real-time information about the connected PoE devices, how much power they draw and how much power is still available. The delay-time-per-port feature reduces the power hike that usually happens at system start, and the PoE priority feature (low, medium, high) allows you to define mission-critical ports that will continue to receive power even if the switch's power budget limit has been exceeded. Furthermore, you can define the maximum available power per port, turn PoE on and off per port and monitor the current power draw of all connected PoE devices. Finally, the Intellinet Network Solutions switch can send SNMP-traps messages to alert the administrator that the total power draw on the switch exceeds the user-defined threshold value. The Powered Device Monitor (Intellinet Network Solutions PDM) feature keeps an eye on connected PoE devices and restarts them in case they stop responding. What's more, you can also program the Intellinet Network Solutions PoE switch to restart connected PoE devices based upon a schedule, ensuring that the PoE devices remain stable and operational.

Eliminate Bottlenecks with Gigabit Speeds
Equipped with 16 auto-sensing 10/100/1000 Mbps RJ45 Gigabit Ethernet ports, the 16-Port PoE Web-Managed Gigabit Switch (561198) offers plenty of performance for your computers, servers and other networking devices. In addition, two small form-factor pluggable GBIC module slots (SFP) provide fibre connectivity for greater distances.

Full Layer 2+ Management Features
The switch includes full Layer 2+ Management features. The software set includes up to 4k 802.1Q VLAN and advanced protocol VLAN, and private VLAN. There are eight physical Quality of Service queues, Multicast filtering, Rapid Spanning Tree Protocol to avoid network loop, Multiple Spanning Tree Protocol (MSTP) to integrate VLAN and spanning tree, LACP, port mirroring and advanced network security features.

Advanced Security
The Intellinet Network Solutions 16-Port PoE+ Web-Managed Gigabit Switch (561198) supports advanced security features. For secure switch management, HTTPS and SSH are provided. In addition, the login password and configuration packets are secured. Port binding allows a specific MAC address to be bound to a port, and then only that MAC has the privilege to access the network. Thanks to 802.1X port based access control, every user needs to be authorised first when they want to access the network. The Layer 2+ access control list (ACL) allows the user to define the access privilege based on IP or port number.


* Total PoE budget for this switch is 374 watts. Per-port average power distribution is 23 watts; maximum per-port power usage cannot exceed 30 watts.
More Information
Part Code: 561198-UK
EAN 0766623561198
Specification
Ports & interfaces
Copper ethernet cabling technology10BASE-T,100BASE-TX,1000BASE-T
Basic switching RJ-45 Ethernet ports quantity16
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Installed SFP modules quantity2
Virtual LAN features
VLAN supportYes
Virtual LAN featuresPort-based VLAN,Tagged VLAN
Technical details
Product colourBlack
Noise level45 dB
Housing materialMetal
Rack mountingYes
Management features
Switch typeManaged
Web-based managementYes
Quality of Service (QoS) supportYes
Switch layerL2+
Network
Copper ethernet cabling technology10BASE-T,100BASE-TX,1000BASE-T
Networking standardsIEEE 802.1D,IEEE 802.1Q,IEEE 802.1p,IEEE 802.1w,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3af,IEEE 802.3at,IEEE 802.3az,IEEE 802.3u,IEEE 802.3x
Full duplexYes
VLAN supportYes
Spanning tree protocolYes
Rate limitingYes
Port mirroringYes
Link aggregationYes
Flow control supportYes
Broadcast storm controlYes
Auto MDI/MDI-XYes
Virtual LAN featuresPort-based VLAN,Tagged VLAN
Data transmission
Packet forwarding rate (100 Mbps)148800 pps
Packet forwarding rate (10 Mbps)14880 pps
Packet forwarding rate (1 Gbps)1488000 pps
Jumbo frames9000
MAC address table8000 entries
Switching capacity36 Gbit/s
Store-and-forwardYes
Jumbo frames supportYes
Certificates
CertificationFCC Class A, CE
Design
Product colourBlack
LED indicatorsYes
Housing materialMetal
CertificationFCC Class A, CE
Rack mountingYes
Number of fans2 fan(s)
Performance
Noise level45 dB
Indication
LED indicatorsYes
Power
Power consumption (max)410 W
AC input voltage100 - 240 V
AC input frequency50/60 Hz
Power over Ethernet (PoE)
Power over Ethernet (PoE) power per port30 W
Total Power over Ethernet (PoE) budget374 W
Power over Ethernet (PoE)Yes
Power over Ethernet (PoE) type supportedPoE+
Operational conditions
Storage temperature (T-T)-20 - 90 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90%
Weight & dimensions
Width440 mm
Depth208 mm
Height44 mm
Weight2.5 kg
Packaging data
Package typeBox
Rack mount kitYes
Quick start guideYes
ManualYes
Cables includedAC
Packaging content
Rack mount kitYes
Quick start guideYes
ManualYes
Cables includedAC
Manufacturer Intellinet

Install hardware to customer specification

Installhardware
 


We can build your servers, storage and related products to suit your exact requirements, fully customisable. We can advise you on the components that will deliver maximum performance.

  • Qualified Engineers
  • Cost effective
  • Professional Service
  • Quality
  • Bespoke Service
  • ESD-free Configuration Centre
  • Remove overheads

 

Install Operating System and perform Windows updates

install server
 

We specialise in installing and updating Microsoft Server Environments. Our qualified engineers will install OS and perform critical Windows updates saving you time to concentrate on the core business.

  • Microsoft Certified Professional Staff
  • Time Saving
  • Server is patched against threats
  • Ready straight from the box
  • Deliver Project on time

 

Configure hard drives in specified RAID

server raid

Setting up RAID can be quite complicated, we can set up various RAID options for you e.g. RAID1, RAID5, RAID10 etc.
  • Ready for OS installation
  • Performance
  • Complexity simplified

 

Install any customer specific BIOS/Firmware settings

server bios
Powering on and testing your product prior to despatch will prevent you from receiving Dead on Arrival (DOA) product. This is particularly important if the product is needed for an urgent installation.
  • Patched and up to date
  • Avoid problematic firmwares

 

Install server role services specified by the customer

Install Server Role
We can install key roles on your server ready for deployment. We will work with you and customise it to your business needs.

We are pleased to offer the following:

Domain controller: Domain controller is the centrepiece of your network as it manages all access.

Active Directory: Active Directory is a directory service. It stores user account information and enforces security policy.

DHCP: DHCP assigns IP addresses to devices on a network.

DNS: DNS translates names into IP addresses e.g. servername to 192.168.1.1

Distributed File System: DFS offers the ability to share files across the network with greater access policy.

Static IP Address: We can assign static IP addresses that you specify along with subnet mask, gateway address and DNS info so it’s ready from the moment it leaves our Config Centre. Once the server is on your network, you can immediately start configuring remotely from your office.

  • Essential roles
  • Deployment ready
  • Network Friendly
  • Work remotely – never leave your office
  • Tailored service
  • Qualified Microsoft Server engineers
  • We’ll do most of the work for you so you don’t have to.

 

Full Soak Test (12/24 hour)

Soak Test
We can run your system though comprehensive test cycles identifying faults, system stability and performance.
  • Identify issues
  • Measure system’s stability
  • Time Saving

 

Create customers asset tag/register

Tag
We offer asset tagging to ensure equipment is pre-tagged on delivery. Tamper resistant labels are available and personalised to your company. We will keep a record of asset numbers and serial numbers for management of warranty support or DOA calls.
  • Professional Service
  • Deployment ready
  • Personalised
  • Easily changeable

 

PDI - Pre Delivery Inspection

PDI
Powering on and testing your product prior to despatch will prevent you from receiving Dead on Arrival (DOA) product. This is particularly important if the product is needed for an urgent installation.
  • Reliability of Equipment
  • Avoid disappointment
  • Deliver project on time
Delivery Information




Standard Delivery (2 Working Days)
£7 per order

Free Delivery (7 days)
Free

Delivery information:
Working days are Monday to Friday (excluding bank holidays).
Order cut-off time is 4pm, orders received after 4pm will be processed on the next working day.

Please Note:
Weight/Size/Post Code exceptions apply, please read our Terms & Conditions for full details. Prices subject to VAT.
Delivery prices based on deliveries upto 20kg in weight, weights exceeding 20kg may incur delivery surcharges.
APC UPS products are excluded from free delivery due to their heavy weight.
Quoted delivery timescales are based on information provided by shipping partners, on occasion these can vary and we can not be held responsible for this.
All delivery services require a signature on delivery, please ensure someone will be available to sign.