Images are for illustrative purposes only, actual product may differ

Intel I210T1BLK networking card Ethernet 1000 Mbit/s Internal

£68.21 £56.84
In stock
Part Code:
I210T1BLK
Intel


The new Intel® Ethernet Server Adapter I210 builds on Intel’s history of excellence in Ethernet products. Intel continues its market leadership with this newest generation PCIe* GbE network adapter. Based on the Intel® Ethernet Controller I210, this adapter represents the next step in the Gigabit Ethernet (GbE) networking evolution for the enterprise and data center offering Audio-Video-Bridging (AVB) support, along with power management technologies such as Energy Efficient Ethernet (EEE) and DMA Coalescing (DMAC).

Audio-Video Bridging (AVB)
The Intel® Ethernet Server Adapter I210 supports IEEE 802.1Qav Audio-Video Bridging (AVB) for customers requiring tightly controlled media stream synchronization, buffering, and reservation. The 802.1Qav is part of the AVB specification that provides a way to guarantee bounded latency and latency variation for time sensitive traffic and includes:
- Timing and Synchronization for timespecific applications (802.1AS) Stream Reservation (SR) protocol to guarantee the resources needed for Audio/Video (AV) streams (802.1Qat)
- Forwarding and queueing enhancements for time sensitive streams (802.1Qav).

Performance Optimization
The Intel® Ethernet Server Adapter I210 contains four transmit and four receive
queues. These queues offer Error Correcting Memory (ECC) protection for improved data reliability. The adapter efficiently manages packets with minimum latency by combining parallel and pipelined logic architectures optimized for these independent transmit and receive queues. These queues, combined with Receive Side Scaling (RSS) and Message Signal Interrupt Extension (MSI-X) support, optimize the performance on servers with multi-core processors.

Power Management Technologies
Today, companies everywhere are looking for ways to decrease energy consumption across the enterprise to reduce costs and environmental impact, while at the same time solving increasingly important power density challenges. That’s why Intel has introduced new, advanced Power Management Technologies (PMTs that enable enterprises to configure power options on the adapter and more effectively manage power consumption.

Energy Efficient Ethernet (EEE)
The Intel Ethernet Server Adapter I210 family supports the IEEE802.3az Energy Efficient Ethernet (EEE) standard so that, during periods of low network activity, EEE reduces the power consumption of an Ethernet connection by negotiating with a compliant EEE switch port to transition to a low power idle (LPI) state. This reduces the controller power to approximately
50% of its normal operating power, saving power on the network port and the switch port. When increased network traffic is detected, the controller and the switch quickly come back to full power to handle the increased network traffic. EEE is supported for both 1000BASE-T and 100BASE-TX.

DMA Coalescing
Another power management technology that can reduce power on the server platform is DMA Coalescing (DMAC). Typically, when a packet arrives at the adapter, a DMA request is initiated in order to place the packet into host (or server) memory. This transaction wakes up the processor, memory, and other system components from a lower power state in order to perform the tasks required to handle the incoming packet. Based on the configurable DMAC settings, incoming packets are buffered momentarily before any DMA calls are made. This enables the controller to intelligently identify opportunities to batch multiple packets together so that when components are wakened from lower power states they can efficiently handle the
batched packets at the same time. This enables platform components to remain in lower power states longer, which can dramatically reduce platform energy consumption. DMAC synchronizes DMA calls across all controller ports to ensure maximum power savings.

Environmentally Friendly Design
The Intel® Ethernet Server Adapter I210 Family is low halogen1 and completely lead-free to reduce the potential for environmental impact. This, in combination with power management technologies, a unique ventilated bracket, and spacesaving design make this adapter an ideal
solution for compact workstations and entry-level servers.
More Information
Part Code: I210T1BLK
EAN 5032037049603
Specification
Ports & interfaces
InternalYes
Ethernet LAN (RJ-45) ports1
InterfaceEthernet
Host interfacePCI Express
Connectivity technologyWired
Bandwidth
Maximum data transfer rate1000 Mbit/s
Technical details
Interface typePCIe v2.1 (2.5 GT/s)
Thermal power1 W
Speed & slot width2.5 GT/s, x1 Lane
PCI-SIG* SR-IOV CapableNo
On-chip QoS and Traffic ManagementNo
Low halogen options availableNo
iWARP/RDMANo
Intelligent OffloadsYes
Intel Virtual Machine Device Queues (VMDq)No
Intel Flexible Port PartitioningNo
Intel Ethernet Power ManagementYes
Intel Data Direct I/O TechnologyNo
Fiber Channel over EthernetNo
Harmonized System (HS) code8517620090
Thermal Design Power (TDP)1 W
Product typeNetwork Interface Card
Halogen-freeNo
StatusLaunched
Product brief URLhttp://www.intel.com/content/www/us/en/network-adapters/gigabit-network-adapters/ethernet-server-adapter-i210-brief.html
Network interface card typeServer
Network interface card cable mediumCopper
Market segmentSRV
Launch dateQ1'13
Last change63903513
Design
Conflict-FreeYes
Product familyIntel Gigabit server adapter
Product seriesIntel I210
InternalYes
Network
Ethernet LANYes
Cabling technology10/100/1000BaseT(X)
Networking standardsIEEE 802.3,IEEE 802.3ab,IEEE 802.3u
LAN controllerIntel I210
Maximum data transfer rate1000 Mbit/s
Performance
Conflict-FreeYes
Ethernet adapter ARK ID68668
Thermal power1 W
Speed & slot width2.5 GT/s, x1 Lane
PCI-SIG* SR-IOV CapableNo
On-chip QoS and Traffic ManagementNo
iWARP/RDMANo
Intelligent OffloadsYes
Intel Virtual Machine Device Queues (VMDq)No
Intel Flexible Port PartitioningNo
Intel Ethernet Power ManagementYes
Intel Data Direct I/O TechnologyNo
Fiber Channel over EthernetNo
Other features
Conflict-FreeYes
Thermal Design Power (TDP)1 W
Product typeNetwork Interface Card
Halogen-freeNo
Ethernet adapter ARK ID68668
Interface typePCIe v2.1 (2.5 GT/s)
Cable typeRJ-45 Category-5, up to 100 m
Thermal power1 W
Speed & slot width2.5 GT/s, x1 Lane
PCI-SIG* SR-IOV CapableNo
On-chip QoS and Traffic ManagementNo
Low halogen options availableNo
iWARP/RDMANo
Intelligent OffloadsYes
Intel Virtual Machine Device Queues (VMDq)No
Intel Flexible Port PartitioningNo
Intel Ethernet Power ManagementYes
Intel Data Direct I/O TechnologyNo
Fiber Channel over EthernetNo
StatusLaunched
Product brief URLhttp://www.intel.com/content/www/us/en/network-adapters/gigabit-network-adapters/ethernet-server-adapter-i210-brief.html
Network interface card typeServer
Network interface card cable mediumCopper
Market segmentSRV
Launch dateQ1'13
Last change63903513
Product familyIntel Gigabit server adapter
Product seriesIntel I210
Harmonized System (HS) code8517620090
Controller typeIntel I210
Cabling typeRJ45 Category 5, up to 100 m
Bracket heightLow Profile and Full Height
Manufacturer Intel
PDF Url http://objects.icecat.biz/objects/mm

Install hardware to customer specification

Installhardware
 


We can build your servers, storage and related products to suit your exact requirements, fully customisable. We can advise you on the components that will deliver maximum performance.

  • Qualified Engineers
  • Cost effective
  • Professional Service
  • Quality
  • Bespoke Service
  • ESD-free Configuration Centre
  • Remove overheads

 

Install Operating System and perform Windows updates

install server
 

We specialise in installing and updating Microsoft Server Environments. Our qualified engineers will install OS and perform critical Windows updates saving you time to concentrate on the core business.

  • Microsoft Certified Professional Staff
  • Time Saving
  • Server is patched against threats
  • Ready straight from the box
  • Deliver Project on time

 

Configure hard drives in specified RAID

server raid

Setting up RAID can be quite complicated, we can set up various RAID options for you e.g. RAID1, RAID5, RAID10 etc.
  • Ready for OS installation
  • Performance
  • Complexity simplified

 

Install any customer specific BIOS/Firmware settings

server bios
Powering on and testing your product prior to despatch will prevent you from receiving Dead on Arrival (DOA) product. This is particularly important if the product is needed for an urgent installation.
  • Patched and up to date
  • Avoid problematic firmwares

 

Install server role services specified by the customer

Install Server Role
We can install key roles on your server ready for deployment. We will work with you and customise it to your business needs.

We are pleased to offer the following:

Domain controller: Domain controller is the centrepiece of your network as it manages all access.

Active Directory: Active Directory is a directory service. It stores user account information and enforces security policy.

DHCP: DHCP assigns IP addresses to devices on a network.

DNS: DNS translates names into IP addresses e.g. servername to 192.168.1.1

Distributed File System: DFS offers the ability to share files across the network with greater access policy.

Static IP Address: We can assign static IP addresses that you specify along with subnet mask, gateway address and DNS info so it’s ready from the moment it leaves our Config Centre. Once the server is on your network, you can immediately start configuring remotely from your office.

  • Essential roles
  • Deployment ready
  • Network Friendly
  • Work remotely – never leave your office
  • Tailored service
  • Qualified Microsoft Server engineers
  • We’ll do most of the work for you so you don’t have to.

 

Full Soak Test (12/24 hour)

Soak Test
We can run your system though comprehensive test cycles identifying faults, system stability and performance.
  • Identify issues
  • Measure system’s stability
  • Time Saving

 

Create customers asset tag/register

Tag
We offer asset tagging to ensure equipment is pre-tagged on delivery. Tamper resistant labels are available and personalised to your company. We will keep a record of asset numbers and serial numbers for management of warranty support or DOA calls.
  • Professional Service
  • Deployment ready
  • Personalised
  • Easily changeable

 

PDI - Pre Delivery Inspection

PDI
Powering on and testing your product prior to despatch will prevent you from receiving Dead on Arrival (DOA) product. This is particularly important if the product is needed for an urgent installation.
  • Reliability of Equipment
  • Avoid disappointment
  • Deliver project on time
Delivery Information




Standard Delivery (2 Working Days)
£7 per order

Free Delivery (7 days)
Free

Delivery information:
Working days are Monday to Friday (excluding bank holidays).
Order cut-off time is 4pm, orders received after 4pm will be processed on the next working day.

Please Note:
Weight/Size/Post Code exceptions apply, please read our Terms & Conditions for full details. Prices subject to VAT.
Delivery prices based on deliveries upto 20kg in weight, weights exceeding 20kg may incur delivery surcharges.
APC UPS products are excluded from free delivery due to their heavy weight.
Quoted delivery timescales are based on information provided by shipping partners, on occasion these can vary and we can not be held responsible for this.
All delivery services require a signature on delivery, please ensure someone will be available to sign.