Images are for illustrative purposes only, actual product may differ

D-Link DPE-301GI PoE adapter Fast Ethernet,Gigabit Ethernet

£41.76 £34.80
In stock
Part Code:
DPE-301GI
D-Link


- Facilitates deployment of PoE devices where power outlets are not available
- Reduces installation and network equipment costs by eliminating the need for electrical wiring
- Provides power over existing network cabling to PoE devices such as access points, IP cameras, and IP phones
- Lightweight, compact and easy to install
- Supports 802.3af / 802.3at
- 10/100/1000 interface provides flexibility for all types of connections

D-Link’s DPE-301GI 1-Port PoE Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (PoE), even when other devices in the network do not support it. With PoE technology, low voltage DC power and Ethernet data signals are combined on a single network cable, which facilitates powering of end devices like IP Cameras, wireless Access Points (APs), and VoIP Phones. This reduces cable clutter, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable places, reduces installation time, and lowers costs.

The DPE-301GI device supports Gigabit speeds, and can connect to 10Mbps, 100Mbps or 1000Mbps through the RJ-45 interface. This device also supports the IEEE 802.3af and 802.3at PoE/PoE+ standards, which ensures interoperability with other standards-based PoE and PoE+ devices. Small and compact, the DPE-301GI is lightweight, has integrated mounting slots, and is easy to install.

The DPE-301GI provides a power and data connection to a PoE device over a single network cable. It allows I.T. Professionals to mount their PoE devices virtually anywhere in a building, such as on ceilings or near entryways, and eliminates the need for nearby power outlets and attached power supplies. The DPE-301GI combines electrical power with a Gigabit network connection and produces a Gigabit PoE signal, allowing a single Ethernet cable to carry both data and power to a device.

Also known as a “midspan PSE”, the DPE-301GI PoE injector can be used when deploying a multi-port PoE switch is impractical or not feasible. It has two 10/100/1000 RJ-45 ports. One port is for LAN IN, which is the network connection,typically connected to a non-PoE switch or router. The other port isfor PoE OUT, which is the connection that provides both power and data signal to the end device (PD). The DPE-301GI can be located anywhere on the Ethernet link, although it’s typically placed near the switch/router.

Location of the injector does not impact the maximum 100m (328ft.) distance from the switch/router to the end device.

Support for IEEE 802.3at ensures the DPE-301GI can power PoE+ devices up to 30W, such as high power 802.11ac APs and IP cameras with PTZ motors, heaters and blowers.

PoE Injector and PoE Splitter Tandem
Both the DPE-301GI (injector) and DPE-301GS (splitter) can be used together, as a complete PoE transport system. This is especially useful when a PoE switch is not available, and the end device is not PoE capable, but the Network Administrator still prefers the benefits of PoE. Simply install the injector close to the network switch, install the splitter close to the end device, and plug in the cables.
More Information
Part Code: DPE-301GI
EAN 0790069416668
Specification
Networking
Networking standardsIEEE 802.3,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3at,IEEE 802.3u
Power over Ethernet (PoE)Yes
Ethernet LAN data rates10,100,1000 Mbit/s
Ethernet interface typeFast Ethernet,Gigabit Ethernet
Features
Product colourWhite
Networking standardsIEEE 802.3,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3at,IEEE 802.3u
Rack mountingNo
LED indicatorsYes
CertificationCE, FCC, VCCI, RCM
Ports & interfaces
DC-in jackYes
Ethernet LAN (RJ-45) ports2
Power
Output power32.4 W
Output current0.6 A
AC adapter input voltage100 - 240 V
AC adapter frequency50/60 Hz
Technical details
Number of products included1 pc(s)
Package width153 mm
Package height68 mm
Power over Ethernet (PoE)Yes
Operating temperature (T-T)32 - 122 °F
Ethernet LAN data rates10,100,1000 Mbit/s
Ethernet interface typeFast Ethernet,Gigabit Ethernet
Shipping (inner) case width23.3 cm
Shipping (inner) case net weight4.1 kg
Shipping (inner) case length32.6 cm
Shipping (inner) case height36 cm
Shipping (inner) case gross weight4.63 kg
Quantity per shipping (inner) case10 pc(s)
Quantity per pallet (sea)600 pc(s)
Quantity per pallet (air)600 pc(s)
Pallet width110 cm
Pallet length120 cm
Pallet height (sea)194 cm
Pallet height (air)194 cm
Pallet gross weight (sea)297.8 kg
Pallet gross weight (air)297.8 kg
Number of cartons per pallet (sea)60
Number of cartons per pallet (air)60
Operational conditions
Storage temperature (T-T)-30 - 70 °C
Storage relative humidity (H-H)5 - 95%
Operating temperature (T-T)32 - 122 °F
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)5 - 95%
Weight & dimensions
Package weight398 g
Package depth213 mm
Package width153 mm
Package height68 mm
Weight70 g
Dimensions (WxDxH)109.8 x 62.2 x 24.5 mm
Packaging content
Number of products included1 pc(s)
Packaging data
Package weight398 g
Package depth213 mm
Package width153 mm
Package height68 mm
Certificates
CertificationCE, FCC, VCCI, RCM
Indication
LED indicatorsYes
Manufacturer D-Link
PDF Url http://pdfs.icecat.biz/pdf/47533948-59.pdf

Install hardware to customer specification

Installhardware
 


We can build your servers, storage and related products to suit your exact requirements, fully customisable. We can advise you on the components that will deliver maximum performance.

  • Qualified Engineers
  • Cost effective
  • Professional Service
  • Quality
  • Bespoke Service
  • ESD-free Configuration Centre
  • Remove overheads

 

Install Operating System and perform Windows updates

install server
 

We specialise in installing and updating Microsoft Server Environments. Our qualified engineers will install OS and perform critical Windows updates saving you time to concentrate on the core business.

  • Microsoft Certified Professional Staff
  • Time Saving
  • Server is patched against threats
  • Ready straight from the box
  • Deliver Project on time

 

Configure hard drives in specified RAID

server raid

Setting up RAID can be quite complicated, we can set up various RAID options for you e.g. RAID1, RAID5, RAID10 etc.
  • Ready for OS installation
  • Performance
  • Complexity simplified

 

Install any customer specific BIOS/Firmware settings

server bios
Powering on and testing your product prior to despatch will prevent you from receiving Dead on Arrival (DOA) product. This is particularly important if the product is needed for an urgent installation.
  • Patched and up to date
  • Avoid problematic firmwares

 

Install server role services specified by the customer

Install Server Role
We can install key roles on your server ready for deployment. We will work with you and customise it to your business needs.

We are pleased to offer the following:

Domain controller: Domain controller is the centrepiece of your network as it manages all access.

Active Directory: Active Directory is a directory service. It stores user account information and enforces security policy.

DHCP: DHCP assigns IP addresses to devices on a network.

DNS: DNS translates names into IP addresses e.g. servername to 192.168.1.1

Distributed File System: DFS offers the ability to share files across the network with greater access policy.

Static IP Address: We can assign static IP addresses that you specify along with subnet mask, gateway address and DNS info so it’s ready from the moment it leaves our Config Centre. Once the server is on your network, you can immediately start configuring remotely from your office.

  • Essential roles
  • Deployment ready
  • Network Friendly
  • Work remotely – never leave your office
  • Tailored service
  • Qualified Microsoft Server engineers
  • We’ll do most of the work for you so you don’t have to.

 

Full Soak Test (12/24 hour)

Soak Test
We can run your system though comprehensive test cycles identifying faults, system stability and performance.
  • Identify issues
  • Measure system’s stability
  • Time Saving

 

Create customers asset tag/register

Tag
We offer asset tagging to ensure equipment is pre-tagged on delivery. Tamper resistant labels are available and personalised to your company. We will keep a record of asset numbers and serial numbers for management of warranty support or DOA calls.
  • Professional Service
  • Deployment ready
  • Personalised
  • Easily changeable

 

PDI - Pre Delivery Inspection

PDI
Powering on and testing your product prior to despatch will prevent you from receiving Dead on Arrival (DOA) product. This is particularly important if the product is needed for an urgent installation.
  • Reliability of Equipment
  • Avoid disappointment
  • Deliver project on time
Delivery Information




Standard Delivery (2 Working Days)
£7 per order

Free Delivery (7 days)
Free

Delivery information:
Working days are Monday to Friday (excluding bank holidays).
Order cut-off time is 4pm, orders received after 4pm will be processed on the next working day.

Please Note:
Weight/Size/Post Code exceptions apply, please read our Terms & Conditions for full details. Prices subject to VAT.
Delivery prices based on deliveries upto 20kg in weight, weights exceeding 20kg may incur delivery surcharges.
APC UPS products are excluded from free delivery due to their heavy weight.
Quoted delivery timescales are based on information provided by shipping partners, on occasion these can vary and we can not be held responsible for this.
All delivery services require a signature on delivery, please ensure someone will be available to sign.