Images are for illustrative purposes only, actual product may differ

D-Link DGS-1210-10 network switch Managed L2 Gigabit Ethernet (10/100/1000) Black, Gray 1U

£71.44 £59.53
In stock
Part Code:
DGS-1210-10
D-Link


The DGS-1210-52 Web Smart switch with advanced management functions including SNMP, Web Management, SmartConsole Utility, and compact command line provides a complete and affordable solution for small and medium businesses.

The DGS-1210 Series is the latest generation of D-Link Web Smart Switches featuring D-Link Green 3.0 technology. The series complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv6 management and configurations ensure your network remains protected after the upgrade from IPv4 to IPv6*. By offering multiple management options, the DGS-1210 series allows quick deployment, infrastructure expansion, and seamless function upgrades. Targeting small and medium-sized businesses, the DGS-1210 Web Smart Switches provide functionality, security, and manageability for a fraction of the standard cost of ownership.

Energy Saving
DGS-1210 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1210 switches offer advanced power-saving settings including port shutoff and standby, LED shutoff, and system hibernation based on custom time profiles. The time profiles can also be applied to the PoE switch so that unnecessary power consumption can be saved during off hours. The DGS-1210 Series switches can also detect the length of connected cables to automatically reduce power usage on shorter cable connections.

Easy Management
The D-Link Web Smart Switch series is designed for easy management. All configurations can be made through a Web interface regardless of the host PC’s operating system. In the first installation, the SmartConsole Utility will automatically discover all D-Link Smart switches in the network, allowing administrators to assign IP addresses and the subnet mask quickly. It also allows simultaneous firmware upgrades to multiple switches, saving a great deal of time. Important management commands, such as download firmware or configuration file, offer a sophisticated method of batch operations for multiple switches.

Auto Surveillance VLAN and Voice VLAN
The D-Link Web Smart series automates the process of setting up IP surveillance and VoIP devices on a network. Auto Surveillance VLAN consolidates data and surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic are at their highest levels. Similarly, the Auto Voice VLAN guarantees clear quality and efficient transmission for all voice communication.

Extensive Layer 2 Features
Equipped with a complete line-up of L2 features, these switches include IGMP Snooping, Port Mirroring, Spanning Tree, and Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port and automatically shut down the affected port. The Cable Diagnostic feature designed primarily for administrators and customer service representatives, can rapidly discover the type of error and determine the cable quality.

Secure your Network
D-Link’s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and protects the network by screening traffic from illegal MAC or IP addresses. ARP Spoofing Prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by Man-in-the-Middle attacks, and prevents wasting CPU cycles on these packets. For added security, the DHCP Server Screening feature blocks rogue DHCP server packets from user ports to prevent unauthorized IP assignment.
More Information
Part Code: DGS-1210-10
EAN 0790069411670
Specification
Management features
Multicast supportYes
ARP inspectionYes
Switch typeManaged
Web-based managementYes
Quality of Service (QoS) supportYes
MIB supportYes
Switch layerL2
Configuring Location Settings (CLI)Yes
Network
IGMP snoopingYes
Networking standardsIEEE 802.3,IEEE 802.3ab,IEEE 802.3u,IEEE 802.3x
Full duplexYes
Head-of-line (HOL) blockingYes
Spanning tree protocolYes
Port mirroringYes
Link aggregationYes
Flow control supportYes
Auto MDI/MDI-XYes
10G supportNo
Auto-negotiationYes
Performance
Packet buffer memory0.512 MB
StackableYes
Auto-negotiationYes
Mean time between failures (MTBF)205249 h
Power
Power connectorDC-in jack
AC input voltage100 - 240 V
AC input frequency50/60 Hz
Technical details
Form factor1U
Product colourBlack, Gray
StackableYes
Mean time between failures (MTBF)205249 h
Rack mountingYes
Shipping (inner) case width34.6 cm
Shipping (inner) case net weight10.4 kg
Shipping (inner) case length38.2 cm
Shipping (inner) case height31.7 cm
Quantity per shipping (inner) case5 pc(s)
Shipping (inner) case gross weight11.1 kg
Quantity per pallet (sea)270 pc(s)
Quantity per pallet (air)180 pc(s)
Pallet width120 cm
Pallet length110 cm
Pallet height (sea)2.04 m
Pallet height (air)140.3 cm
Pallet gross weight (sea)625.9 kg
Pallet gross weight (air)425.5 kg
Number of cartons per pallet (sea)54
Number of cartons per pallet (air)36
Ports & interfaces
SFP module slots quantity2
Basic switching RJ-45 Ethernet ports quantity8
Basic switching RJ-45 Ethernet ports typeGigabit Ethernet (10/100/1000)
Power connectorDC-in jack
Data transmission
Jumbo frames9216
Packet buffer memory0.512 MB
MAC address table8000 entries
Switching capacity20 Gbit/s
Store-and-forwardYes
Jumbo frames supportYes
Forwarding rate14.88 Mpps
Security
Loop protectionYes
MAC address filteringYes
IGMP snoopingYes
Access Control List (ACL)Yes
Multicast features
Multicast supportYes
Memory
Packet buffer memory0.512 MB
Design
Form factor1U
Product colourBlack, Gray
StackableYes
Rack mountingYes
Power over Ethernet (PoE)
Power over Ethernet (PoE)No
Operational conditions
Storage temperature (T-T)-10 - 70 °C
Storage relative humidity (H-H)5 - 95%
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95%
Heat dissipation373.96 BTU/h
Weight & dimensions
Width280 mm
Depth126 mm
Height44 mm
Weight980 g
Packaging data
Package width286 mm
Package depth325 mm
Package height70 mm
Package weight2.08 kg
Manufacturer D-Link

Install hardware to customer specification

Installhardware
 


We can build your servers, storage and related products to suit your exact requirements, fully customisable. We can advise you on the components that will deliver maximum performance.

  • Qualified Engineers
  • Cost effective
  • Professional Service
  • Quality
  • Bespoke Service
  • ESD-free Configuration Centre
  • Remove overheads

 

Install Operating System and perform Windows updates

install server
 

We specialise in installing and updating Microsoft Server Environments. Our qualified engineers will install OS and perform critical Windows updates saving you time to concentrate on the core business.

  • Microsoft Certified Professional Staff
  • Time Saving
  • Server is patched against threats
  • Ready straight from the box
  • Deliver Project on time

 

Configure hard drives in specified RAID

server raid

Setting up RAID can be quite complicated, we can set up various RAID options for you e.g. RAID1, RAID5, RAID10 etc.
  • Ready for OS installation
  • Performance
  • Complexity simplified

 

Install any customer specific BIOS/Firmware settings

server bios
Powering on and testing your product prior to despatch will prevent you from receiving Dead on Arrival (DOA) product. This is particularly important if the product is needed for an urgent installation.
  • Patched and up to date
  • Avoid problematic firmwares

 

Install server role services specified by the customer

Install Server Role
We can install key roles on your server ready for deployment. We will work with you and customise it to your business needs.

We are pleased to offer the following:

Domain controller: Domain controller is the centrepiece of your network as it manages all access.

Active Directory: Active Directory is a directory service. It stores user account information and enforces security policy.

DHCP: DHCP assigns IP addresses to devices on a network.

DNS: DNS translates names into IP addresses e.g. servername to 192.168.1.1

Distributed File System: DFS offers the ability to share files across the network with greater access policy.

Static IP Address: We can assign static IP addresses that you specify along with subnet mask, gateway address and DNS info so it’s ready from the moment it leaves our Config Centre. Once the server is on your network, you can immediately start configuring remotely from your office.

  • Essential roles
  • Deployment ready
  • Network Friendly
  • Work remotely – never leave your office
  • Tailored service
  • Qualified Microsoft Server engineers
  • We’ll do most of the work for you so you don’t have to.

 

Full Soak Test (12/24 hour)

Soak Test
We can run your system though comprehensive test cycles identifying faults, system stability and performance.
  • Identify issues
  • Measure system’s stability
  • Time Saving

 

Create customers asset tag/register

Tag
We offer asset tagging to ensure equipment is pre-tagged on delivery. Tamper resistant labels are available and personalised to your company. We will keep a record of asset numbers and serial numbers for management of warranty support or DOA calls.
  • Professional Service
  • Deployment ready
  • Personalised
  • Easily changeable

 

PDI - Pre Delivery Inspection

PDI
Powering on and testing your product prior to despatch will prevent you from receiving Dead on Arrival (DOA) product. This is particularly important if the product is needed for an urgent installation.
  • Reliability of Equipment
  • Avoid disappointment
  • Deliver project on time
Delivery Information




Standard Delivery (2 Working Days)
£7 per order

Free Delivery (7 days)
Free

Delivery information:
Working days are Monday to Friday (excluding bank holidays).
Order cut-off time is 4pm, orders received after 4pm will be processed on the next working day.

Please Note:
Weight/Size/Post Code exceptions apply, please read our Terms & Conditions for full details. Prices subject to VAT.
Delivery prices based on deliveries upto 20kg in weight, weights exceeding 20kg may incur delivery surcharges.
APC UPS products are excluded from free delivery due to their heavy weight.
Quoted delivery timescales are based on information provided by shipping partners, on occasion these can vary and we can not be held responsible for this.
All delivery services require a signature on delivery, please ensure someone will be available to sign.